remedave
New Member
I am in the process of sorting the ABS out fairly simple, i have changed the ECU and 2 sensors and closed all air gaps and done all wheel bearings, the Abs light blinks when the ignition is turned on to say no faults (after i had cleared them) but the light refuses to extinguish until you reach a road speed of around 50 mph then it stays of and is fine apart from when you apply the brake below say 10MPH and the abs kicks in for no reason, this doesn't put the light on. then the next time you start the disco the light blinks no codes again then your ding the same all over again over 50 mph etc etc, i have done 200 miles or so like this and no change, the MOT is due and i am pulling my hair out :violent: