Land Raver

Well-Known Member

• Jun 10, 2013

• #1

I'm struggling to find the part number for the plastic Tee piece where the various servo vacuum pipes meet. I want to replace the pipes and I was going to replace the Tee piece too, as I guess this may be brittle anyway and brake when I pull the old hardened pipes off. Can anyone point me in the right direction for one of these please. I've tried searching the various suppliers sites but no joy so far.

 

M

mikebeetle

New Member

• Jun 11, 2013

• #2

Don't know the part number but if you know the hose internal diameter you could look at something like these

CBS Online Ltd | Hose Connectors - Nylon Joiners, Tee's, Y's, Reducers and Elbows - Tee's

 

mrchurchill109

Active Member

• Jun 11, 2013

• #3

That type of thing is a generic item I usually pick up either at the hardware store or the local auto-parts place, There's nothing particularly unusual about them iif I recall correctly - and you are very right that the silly thing will break when you try and remove the old hoses.

ajr

 

doughnut

Member

• Jun 11, 2013

• #4

You can get them on ebay for a couple of quid.

 

Land Raver

Well-Known Member

• Jun 11, 2013

• #5

Thanks fellas, I'll measure the internal hose diameter