cowasaki

Well-Known Member

• Nov 13, 2013

• #1

Does anybody know if this is possible? I want to be able to fit a 3 point seat belt in order to put a baby seat in the middle of the landy rather than the left seat in order that an adult can sit in the more appropriate seat.

 

blue beasty

Leaks an prone to bits dropping off

• Nov 13, 2013

• #2

You can get inertia reel kits to replace static belts on Series' that fit to the top of the bulkhead behind the seats so I dont see why not

 

Station House

Well-Known Member

• Nov 13, 2013

• #3

Worth a read and a click on some of the links

Land Rover Owner • View topic - Fitting a 3 point seatbelt to centre seat

 

F

FireRich059

New Member

• Nov 13, 2013

• #4

I did the same as this post and it works fine...

Land Rover Owner • View topic - Fitting a 3 point seatbelt to centre seat

 

Grimmer

THE Winner

• Nov 13, 2013

• #5

cowasaki said:

Does anybody know if this is possible? I want to be able to fit a 3 point seat belt in order to put a baby seat in the middle of the landy rather than the left seat in order that an adult can sit in the more appropriate seat.

Click to expand...

You can get baby seats that will secure with just a lap belt, there's not a lot of room left to change gear though with a baby seat in the middle

 

cowasaki

Well-Known Member

• Nov 14, 2013

• #6

Grimmer said:

You can get baby seats that will secure with just a lap belt, there's not a lot of room left to change gear though with a baby seat in the middle

Click to expand...

Hmmm. Good point, will check that out before I start messing.