Hi All
Looking to get more comfortable seats for my MY 02, Freelander TD4 3 Door.
Rest of the motor is great nick mechanically & body wise so seems silly selling it for the sake of more comfortable seats?

The ones in there are in good nick, but I have a 'dodgy back with 2 damaged Discs' and although for short journeys they are fine, I do notice it only longer runs, so could do with something more comfortable,
The Lower Back rest is very firm with little give....... but bases seem OK.
Have tried these padded covers, but they are a pain in the A**E - keep coming off!
(We also have a Peugeot 407 and the seats in that are perfect!)

I could get some Freelander Face-Lift Seats (3 door so rare) but they are about (assumimg they fot of course!! )

Has anyway had both ‘Face Lift and Pre Face Lift FR1’s’ and can advise if the seats are better in the later models - they look a better shape….. flatter main seat panels with side bolsters…
(if so I could then sell my existing ones (Spotless Light Grey)

OR … Discovery 1 3 Door seats … OR Bespoke Seats, but not many manufacturers do them for a FL1 3 Door? (Exmoor Trim etc…) Need to be flip forward seats for access to the back seats……

Any ideas

Any advice much appreciated in advance.

I know exactly what you mean. I was considering trying to barstewardize a set of mg/rover 200 half leathers onto the freelander frames.

The seats look a very similar shape except the freelanders sit about 4 inches higher.

Although I guess that could be the problem. Maybe the seats were designed to be sat in with your legs out further..... And hence causing the problems.

it's easy