W

Whitters10

New Member

• Nov 18, 2019

• #1

Aup guys just changed a wheel bearing and abs sensor and the 3 amigos has stayed on do I need to reset ?

 

Shimsteriom

Master Procrastinator

• Nov 18, 2019

• #2

Welcome

 

brianp38dse

Well-Known Member

• Nov 18, 2019

• #3

Hello and welcome

 

Hippo

Lord Hippo

• Nov 19, 2019

• #4

Welcome to the forum

This section is for introductions only. For technical help you should post your questions in the vehicle specific sections listed below, where owners of those vehicles will offer advice.

Main forum index:
www.landyzone.co.uk/forum

Freelander 1 and 2:
https://www.landyzone.co.uk/forum/land-rover-freelander.9

Defender, 90, 110, 130 (tratters)
https://www.landyzone.co.uk/forum/defender-90-110-130.7

Series 1, 2, 3 (tratters)
https://www.landyzone.co.uk/forum/series-land-rovers.6

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10

 

Dorset_dumpling

Well-Known Member

• Nov 19, 2019

• #5

Hippo said:

Welcome to the forum

This section is for introductions only. For technical help you should post your questions in the vehicle specific sections listed below, where owners of those vehicles will offer advice.

Main forum index:
www.landyzone.co.uk/forum

Freelander 1 and 2:
https://www.landyzone.co.uk/forum/land-rover-freelander.9

Defender, 90, 110, 130 (tratters)
https://www.landyzone.co.uk/forum/defender-90-110-130.7

Series 1, 2, 3 (tratters)
https://www.landyzone.co.uk/forum/series-land-rovers.6

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10

Click to expand...

But please do a search before heading over there. This subject has been covered many, many, many times and asking the same question again may lead to answers that could cause offence.