slice

New Member

• Jan 11, 2011

• #1

xmas morning not only froze up my vapouriser, it froze the cooling system too...so i now have a noisy water pump bearing
I've had a gander and the pump looks accessible...but can it be replaced fairly easy?
are there any hidden perils that i should look out for pls

thks,

slice

 

fett

Well-Known Member

• Jan 11, 2011

• #2

its all ok as long as none of the bolts break !!!

I am avoiding doing mine for that reason!

 

joe1972

Well-Known Member

• Jan 11, 2011

• #3

slice said:

xmas morning not only froze up my vapouriser, it froze the cooling system too...so i now have a noisy water pump bearing
I've had a gander and the pump looks accessible...but can it be replaced fairly easy?
are there any hidden perils that i should look out for pls

thks,

slice

Click to expand...

Did the gaskets (inc head gaskets) survive the freeze?!

 

slice

New Member

• Jan 12, 2011

• #4

thanks for the comments guys...hmm knowing me i could quite easily knacker the bolts!! but yeah hadnt thought about damage to the heads & gaskets. i had replaced the black plastic coolant header tank 6 months ago - that had split ..and i do check coolant on a twice weekly basis - it always has lost a small amount per week.. about 1/2 a litre but then i do travel daily 50 mls to work and back (done 48000 mls in 2 years) with no trouble

 

alexdon

Active Member

• Jan 14, 2011

• #5

Replaced my water pump recently, hardest part was getting the viscous fan off even with the correct spanner!!