Bits you need:
Inlet manifold
HP and Lift pump
HP flexible lines I used 6 Meters of ss over braided stuff
Fuel rail with injectors
Loom
MAF sensor - go with Hotwire system on 14CUX best one starts with a 5
Plenum
all sensors on inlet and plenum
flexi tubing 16mm id to go to heater box
35mm to 16mm tee piece to splice into top hose
brackets for pumps
fuel filters 2 x (one for lift pump one for rail)
Fuel regulator - one is sometimes fitted to outlet of rail
and dont forget injector clips (I did - it got quite exciting...!!!!!!!!!!!!!!!)