Luke stevenson
Member
Hi I'm trying to go su carbs to my 3.5 v8 but I don't know where all the hoses and pipe should go. Does anyone have a diagram or could put up some picture that would help me. Many thanks
cooltide
sheep fancier
Luke stevenson
Member
Anyone got any pictures of a twin carb set up. It's replacing injections inlet so I need to know how the fuel lines are run.
Luke stevenson
Member
The one in the fuel tank
cooltide
sheep fancier
Yes efi 40psi. Su around 3psi iirc
Luke stevenson
Member
Do you have any ideas where I can get one
Luke stevenson
Member
Efi hasn't worked since I've owned it. Only ran on Lpg. The ecu isn't sending an earth signal to the injectors so I'm just getting rid and going to carb as there easier. I can't get a ecu with the same number as mine.
MattMatt
Active Member
Any small facet pump will run ok and you don't need to have it in the tank - they will suck fairly well. I went back to carbs on the 3.9 some time ago. Put a inline fuel filter before the pump and again before the carb just to be safe. The fuel pipe runs up and across the top of the bulkhead and round to the nearside carb. There is a link pipe between the two carbs that feeds the offside one
Luke stevenson
Member
Does anyone have a daigram of what the hose hoes where on the carbs. The link above only shows half the picture. Many thanks
jamesmartin
Well-Known Member
Luke stevenson
Member
Do I need to take the old fuel pump out of the tank
