A

acmoss96

New Member

• Jul 28, 2020

• #1

Hi all. I have a 1980 109 ex MoD. I don't use it enough and the latest problem is it wont go into 2WD High. The only options are 4WD High or low transmission.
I've taken the floor plate off and cant see anything obvious but I cant find any videos to show what it should look like when it works properly.
Any help would be appreciated.
Thanks

 

kermit_rr

Very

Full Member

• Jul 28, 2020

• #2

What are you trying to do exactly? Do you mean the yellow knob doesn't pop up when you select low?

 

J

John S

Well-Known Member

• Jul 28, 2020

• #3

Try driving it for a short distance, it’s sized and as posted is the yellow lever springing back? Get under the gearbox and get some WD in there.

 

A

acmoss96

New Member

• Jul 29, 2020

• #4

Thanks both. The yellow lever is working fine and springs back up every time I take the red lever out of High. The trouble is the red lever wont go forward into 2 wheel drive High. It will only go into High if I depress the yellow lever making it 4WD.

 

jamesmartin

Well-Known Member

• Jul 29, 2020

• #5

acmoss96 said:

Thanks both. The yellow lever is working fine and springs back up every time I take the red lever out of High. The trouble is the red lever wont go forward into 2 wheel drive High. It will only go into High if I depress the yellow lever making it 4WD.

Click to expand...

theres 3 shafts poke out of the front of the output housing, one is the red lever one is the yellow the other behind the tin cover will be seized in the housing