N

Nigel Russell

New Member

• Aug 19, 2017

• #1

Hello, this is my first post, because I need some help, sorry! I have a 2013 Defender and the wipers stopped working today! I tried to book it in to my local Land Rover dealer and they can't fit me in until September! I've checked the fuse and it seems okay. Does anyone know if there's a relay that may need changing? Thanks in advance for any help. Nigel

 

tottot

Well-Known Member

• Aug 19, 2017

• #2

Re check that fuse,swap with another to start.

 

Oldseadog

Well-Known Member

• Aug 19, 2017

• #3

Which part of it has stopped working?
'Slow wipe', 'Fast wipe', Delay wipe or Screen wash, or all of them?
Each one can point to a fault on it's own subcircuit, so let's get down to some details.

 

raisingveg

Well-Known Member

• Aug 19, 2017

• #4

check the supply plug from the loom to make sure its not loose

 

lyntonellis

New Member

• Aug 19, 2017

• #5

mine stopped working and it was a problem with a dodgy contact on the switch

 

Scooby22

Well-Known Member

• Aug 19, 2017

• #6

mine stopped after I had the cowling off the steering column for another job and replace it, when I took it back off I found a loose earth wire, I must have knocked it off when removing or fitting the cowling, when I touched the wire to the indicator stalk they worked, I soldered the earth wire to the metal indicator stork. They have been okay since.

 

Scooby22

Well-Known Member

• Aug 19, 2017

• #7

mine stopped after I had the cowling off the steering column for another job and replace it, when I took it back off I found a loose earth wire, I must have knocked it off when removing or fitting the cowling, when I touched the wire to the indicator stalk they worked, I had to solder the earth wire to the metal indicator stork. They have been okay since.