S

simondisco

New Member

• Oct 17, 2013

• #1

i have a 200tdi which has decided too keep blowing oil dipstick out and getting different answers from garages some say head gasket and some rings and pistons anyone any ideas have lost no power or increase in water use :doh:

 

Pikey

Dummy Ejection Facilitator..

• Oct 17, 2013

• #2

Head gasket between no.4 piston and an oilway. Compression gases are blowing into the oilway. and pressurising the sump.

 

jamesmartin

Well-Known Member

• Oct 17, 2013

• #3

could be either , poor injectors can burn hole down or through piston ,head gasket can cause similar as can non opening exhaust valve ,also leaking servo can pressurise engine

 

S

simondisco

New Member

• Oct 17, 2013

• #4

jamesmartin said:

could be either , poor injectors can burn hole down or through piston ,head gasket can cause similar as can non opening exhaust valve ,also leaking servo can pressurise engine

Click to expand...

how wound i detect a leaking servo mate

 

jamesmartin

Well-Known Member

• Oct 17, 2013

• #5

you can often hear it on the servo or remove vac pipe at pump and cap pump and run engine , compression test would show h/g or piston,watching valves with rocker cover off non opening valve

 

easye1

Banned

• Oct 18, 2013

• #6

jamesmartin said:

could be either , poor injectors can burn hole down or through piston ,head gasket can cause similar as can non opening exhaust valve ,

also leaking servo can pressurise engine

Click to expand...

how does it do that young james,
only asking as I cant seem to think how it does that