Tirran

Well-Known Member

• Jun 30, 2020

• #1

Schoolboy error when stripping my Defender for rebuild, didn’t note which port was which on the brake valve or the master cylinder. The valve is NTC8836, I looked at the manual I have and it is unclear to me, can anyone assist ?

BTW what is the yellow ty- wrap for?

thanks

 

Attachments

• 
  D0D33439-CD99-48C6-878B-ECAA7B8A371F.jpeg

  55.6 KB · Views: 105
• 
  88DDBB54-0AC0-42F9-8BDD-29FACE26943C.jpeg

  29.2 KB · Views: 100

turrican

Well-Known Member

• Jun 30, 2020

• #2

There's a diagram on this page for your part number
https://www.lrworkshop.com/parts/NTC8836

 

Tirran

Well-Known Member

• Jun 30, 2020

• #3

turrican said:

There's a diagram on this page for your part number
https://www.lrworkshop.com/parts/NTC8836

Click to expand...

Turrican, I have seen that one, my concern is the orientation of the valve.

 

turrican

Well-Known Member

• Jun 30, 2020

• #4

Have found another picture which shows the orientation top right
https://images.app.goo.gl/85H9RQvzm17AQpXr9

 

Tirran

Well-Known Member

• Jun 30, 2020

• #5

turrican said:

Have found another picture which shows the orientation top right
https://images.app.goo.gl/85H9RQvzm17AQpXr9

Click to expand...

Cool, thanks, I’ll try that and, once I get the damn thing completed test them out. If I hit a tree I’ll know it wasn’t correct much appreciated as this is a job I can get done.