HYBRIDNI

Active Member
Can anybody tell me the parts numbers and locations for exhaust hangers on a 110 200tdi. Mine has none at all and can't figure out what ones I need to buy.

Also...downpipe has a little bracket welded on...but nowhere for it to attach to? Is there another parts that is needed? Their must be because the clamp will simply not support the downpipe alone...keeps slipping. Old one had another botched up bracket welded on that allowed it screw into side of engine.

New exhaust is hanging by 2 botched up hanger things (previous owner) but I need to get it sorted properly.
 
I have a 110 with a 200tdi defender engine in. I wasn't sure which hangers to use.
I gave yrm metal solutions a ring. He got me the right hangers which are galvanised.
They are about £12 each. Other places were wanting to charge stupid money for the middle bracket if I remember correctly.
 
If yo can get the part numbers from the manual or EBay, then do a search on Craddock or Paddock and it should come up, they are cheaper than the galv ones, I got a couple of new ones for mine, easier than trying to weld the rust back together.
 
Follow link and download the parts catalogue.
You want page 593.

pdf Land Rover Manuals | Landroverweb.com

if you then have a look at craddocks and paddocks for the front hanger 9 part number esr2215 which simply bolts on you might change your mind. There is another hanger more expensive than that one.

I can't understand why they are this price.
 
Cheers chaps. Handy link that.

Price of them is just stupid but yrm? Land rovers have told me they can supply the ones I need for mine and they are galvanised and far better price.

A serious moron owned this before me...if he browses forums hope he sees my posts. Would love to say few words for his benefit but think it would get me kicked off...too much to say!
 

Similar threads