T5OKD

Member
Good afternoon all, I have a problem on my 2006 vogue, I cannot control the direction of the vents, the fan works fine, but nothing comes out of any of the vents, everything lights up ok, screen, face , feet etc fan increases speed etc, but nothing from any vent!
Anybody have any ideas?
 
^^^ Wot he said....

Might help to get it on diagnostics and see if it is reporting servo failures....
 
Good afternoon all, I have a problem on my 2006 vogue, I cannot control the direction of the vents, the fan works fine, but nothing comes out of any of the vents, everything lights up ok, screen, face , feet etc fan increases speed etc, but nothing from any vent!
Anybody have any ideas?
As the clever people are on fault, I feel the need to tell you; You do not have a 2006 Vogue.
 
sorry, it was a 2006 vogue the last time I looked, why do you say it isn’t?
Because Vogue is a trim, which covers many models. So when looking for help and parts it is easier when you know the model. It is only the extensive knowledge of those on here, who have helped you, that has allowed them to guess your model.
 
Because Vogue is a trim, which covers many models. So when looking for help and parts it is easier when you know the model. It is only the extensive knowledge of those on here, who have helped you, that has allowed them to guess your model.
My apologies, point taken, a 2006 L322 td6
 
Did you check those front brake pipes when you got her?
I upgraded all the brakes with new callipers, discs and pads fitted all round, as I had her re-mapped and wanted to make sure she had good stopping power, had all the pipes checked and two replaced. Happy days
 
I upgraded all the brakes with new callipers, discs and pads fitted all round, as I had her re-mapped and wanted to make sure she had good stopping power, had all the pipes checked and two replaced. Happy days
Fantastic. Whoever bodged those brake pipes to get it through should be thoroughly ashamed of themselves. I brought it up as would hate to think of someone driving anything with dodgy brake pipes, let alone something the weight of a Range Rover.
 
The new pipes could have had paint on them.....some brake pipe does indeed come coated.....it could just be a note from the Tester to such and he can't check the condition of the pipe itself.....doesn't necessarily mean the old pipe was just painted over.....Devils Advocate....
 
Oh and if its chipped, the next post will be 'My Gearbox just lunched itself....'
 
Fantastic. Whoever bodged those brake pipes to get it through should be thoroughly ashamed of themselves. I brought it up as would hate to think of someone driving anything with dodgy brake pipes, let alone something the weight of a Range Rover.
I absolutely agree with you, it’s a thing I have about stopping safely, if I put new brakes on, I have my own piece of mind, and she stops on a dime ...
 
The new pipes could have had paint on them.....some brake pipe does indeed come coated.....it could just be a note from the Tester to such and he can't check the condition of the pipe itself.....doesn't necessarily mean the old pipe was just painted over.....Devils Advocate....
Perhaps but as two pipes had to be replaced when op had everything checked, I think I'll stick with the " bodged to get it through" theory ;) :)
 

Similar threads