zoolander
New Member
Ive got my MOT on Monday so its time to change the cracked headlight Ive had since sliding into a tree stump 6 months ago.
Trying to remove the bumper first to gain access to the headlight. The Haynes manual gave the job a 2 spanner rating so expected a fairly easy job. So far its been a b*stard.
Have removed the 3 scrivels below the number plate. Removed the 4 screws securing the bumper valance underneath the car. Removed the screws on each wheel arch to gain access to the 10mm bolt holding the bumper to the inner wing. Finally removed the 4 screws at the top edge securing the bumper to the slam panel.
Done all this and the bumper is not moving!!
Any advice on this would greatly appreciated.
cheers
Trying to remove the bumper first to gain access to the headlight. The Haynes manual gave the job a 2 spanner rating so expected a fairly easy job. So far its been a b*stard.
Have removed the 3 scrivels below the number plate. Removed the 4 screws securing the bumper valance underneath the car. Removed the screws on each wheel arch to gain access to the 10mm bolt holding the bumper to the inner wing. Finally removed the 4 screws at the top edge securing the bumper to the slam panel.
Done all this and the bumper is not moving!!
Any advice on this would greatly appreciated.
cheers