Can someone please tell me a cheap calibration tool I can get for the height ride sensor? My icarsoft scanner won’t let me program the new height ride sensors and air shocks. I replaced both front air shocks and height ride sensors and it keeps dropping and saying air ride suspension inactive.
Forgive me if I've missed something. Which RR is it, FF, Sport ?
Datatek
Well-Known Member
Yes but which model?
Datatek
Well-Known Member
So the model is L322. Thanks, now someone may be able to help.
I just replaced the 2 front shocks and height ride sensors last week. And it doing the same **** the old ones were doing. No fault codes come up just says height ride inactive
Henry_b
Think outside, no box required.
What diagnostics are you using?
An el-cheapo unit will do nowt to show faults, you need an Icarsoft LR2 diagnotics or equivalent to even get started..
If there was a fault the EAS won't function until the previous fault has been cleared..
Ok my dad just read me the codes he said one is articulation validity code and the other is passenger rear isn’t the same value as the drivers rear
Datatek
Well-Known Member
Might be worth putting the old sensors back as a test.
The old ones did the same thing lol. That’s why I ordered new ones but of course my dad threw the old ones away
RangeRoller dt
Well-Sprung Member
You done the lock to lock reset.
The old ones will have had 6 pins, I think 3 are for self leveling headlights if fitted. Have you calibrated the sensors?
IMO not as you are asking for a diag that will do it.
IMO not as you are asking for a diag that will do it.
If the calibration is too far out you will keep getting articulation errors. I had to reset mine 5 times on Saturday and recalibrate 3 times until I got it about where I want it.
