J

John Williamson

New Member

• Aug 13, 2015

• #1

I'm going to change the clutch master cylinder as I was told this might help with rough gear changes. But if it turns out to be the gearbox will I have to replace the master cylinder with another new one, or can I reuse the replacement one I used.

 

Gogsy

Member

Donater

• Aug 13, 2015

• #2

I have an auto so not 100% sure, however, I would have thought you could re-use the one you have.

 

freelance

Well-Known Member

• Aug 13, 2015

• #3

All clutch hydraulics are external on 1.8, the master and slave come as on unit, all filled and bled, make sure your clutch actuating arm is oiled and free, and make sure the slave bracket is not cracked or bent, and perhaps give the gearbox an oil change!

 

Bromsgrove Defender

Well-Known Member

• Aug 14, 2015

• #4

Call me pedantic if you will. BUT
Shouldn't this be in the Freelanderer section

 

freelance

Well-Known Member

• Aug 14, 2015

• #5

Ok, you are PEDANTIC, there I said it.

 

Bromsgrove Defender

Well-Known Member

• Aug 18, 2015

• #6

freelance said:

Ok, you are PEDANTIC, there I said it.

Click to expand...

Thank you I feel better for that