My 2004 Freelander TD4 has started to run very lumpy on tickover and is becoming difficult to start. The exhaust gases also smell very strongly of unburnt diesel. I had a similar problem before which I cured by nipping up the connectors on the fuel rail pressure sensor three pin connector but this time the same fix has failed to cure the problem. I'm sure I read somewhere that you can buy an aftermarket kit that replaces these dodgy connections but I can't find the details anywhere. Does anyone have any ideas? Cheers.
have been mentioned a couple of times on these pages
try a site search "fuel rail pressure sensor harness fitting" .. or similar ..
btw: i take it your on about the fuel rail pressure sensor
as there is a sensor on the hp fuel pump known as a pressure regulator ..
best o' luck
