TheMercilessOne

Member

• Jun 21, 2020

• #1

Now this might be a super simple question, but I can't find any online guidance...my DS electric window has stopped working and I'm trying to troubleshoot. Fuses are ok so my next port of call is the switch...how the hell do you get it out? Is there anyway to do so without dismantling the dash?

Thanks

 

mystery

Well-Known Member

• Jun 23, 2020

• #2

looking at image of replacement switch there are tabs not sure if they are top and bottom

 

TheMercilessOne

Member

• Jun 23, 2020

• #3

Thanks...I’ve looked at some pics of the switches but still not clear if you can get them out from the front or the dash needs to be dismantled to get access from the rear...

 

bankz5152

Well-Known Member

• Jun 23, 2020

• #4

Take the radio out, remove the radio surround.

Should give enough access to get the switch out

 

mystery

Well-Known Member

• Jun 23, 2020

• #5

i 'm assuming that they are the same as the Freelander and they just pull forward out of the holder shown in the image and are retained by a spring barb to cause a resistance fit as shown

 

lightning

Well-Known Member

• Jun 23, 2020

• #6

It’s no big deal to remove the centre console, Take the end caps off the dash then remove the screws and take off the dash top rail.
This gives access to the top screws on the centre console and you can then remove it.

 

Galladog

Well-Known Member

• Jun 23, 2020

• #7

I took my window switches out last week to check them.
Just release the radio, mine was held in with two 2 or 3 mm allen screws, pull the radio out, you don't have to disconnect any of the wires and poke the switch out from the back with your finger.