scott collin
New Member
Hi All,I've just bought a 2003 TD4 freelander. It had a blown turbo, and the previous owner couldn't afford to have it replaced.I have replaced it with a low mileage one I sourced locally.
Can anyone identify where the 3 pipes go from the solenoid for the actuator. It is an auto model.
The valve has 3 outlets marked
Vac
Out
ATM
Landrover had pulled pipes off everywhere, and I need to be sure I get them right.
Also, there is a pipe coming out of the rear of a plastic type vacuum reservoir that is open ended.This plastic thing I am describing is on the passenger side and is egg shaped,connected into the vac pump.
The car drives lovely, but I don't want to damage it by over boosting etc.
Any help appreciated
Scott
Can anyone identify where the 3 pipes go from the solenoid for the actuator. It is an auto model.
The valve has 3 outlets marked
Vac
Out
ATM
Landrover had pulled pipes off everywhere, and I need to be sure I get them right.
Also, there is a pipe coming out of the rear of a plastic type vacuum reservoir that is open ended.This plastic thing I am describing is on the passenger side and is egg shaped,connected into the vac pump.
The car drives lovely, but I don't want to damage it by over boosting etc.
Any help appreciated
Scott