No nodge. not tried that. is it the little wire at goes on the spade terminal
Hi, just found your post, having similar problems as you had, was the bottom bolt just a stud or was there a nut on it and did you get it from underneath.Ok.Only two bolts holding motor in.Undid those, slipped out the motor, put new motor in,bolted it up,replaced big red wire,replaced little wire on solenoid,refitted air box,secured battery,put key in ignition,gave it a turn and.............bingo.Easiest job in the world if you have the right info.
Thanks all and goodnight.
MERRY CHRISTMAS