perrylandy

New Member
Hi Guys,
Desperately need help,Newbie here.
Just changed clutch plate pressure plate and thrust bearing and spigot bush on my landy.
Problem is after putting back everything together wiring looms etc, theres ABSOLUTELY NO POWER!!
Dashboard doesn't light up,engine not cranking nothing.Battery is a brand new one.
Where do I even start please help.
Regards
Perry
 
Obvious first place to start would be earth strap to battery, not sure where it goes to on a td5 though. It has to be something obvious like that to completely stop everything working!
 
Dunno where the earths are on a td5 but it does indeed sound like you forgot to put it back.
 
check with a multi meter , put one probe on the positive side of the battery, the other on the ecu mounting bolt, you should have 12+volts, if not re check earths
 
Follow the earth cable from the battery. On my old fender it's bolted to the chassis using one of the gearbox crossmember bolts and to the transfer box.
 
The only thing this can be is an earth issue.

One thing you could try in the mean time is get a length of battery cable link it to the negative terminal and touch it to a bare piece of chassis/gearbox see if you get power.

Also are you certain the battery aint fooked?
 
The only thing this can be is an earth issue.

One thing you could try in the mean time is get a length of battery cable link it to the negative terminal and touch it to a bare piece of chassis/gearbox see if you get power.

Also are you certain the battery aint fooked?

yup, just stick a jump lead from bat neg to engine block/chassis and see if everything works.
 

Similar threads