1. > 4. Fit retainer to injector. Carefully fit injector,
ensuring retainer is located on its dowel, and
tighten Torx bolt to 32 Nm (24 lbf.ft)
2. > 4. Fit and progressively tighten new rocker shaft
bolts to 33 Nm (24 lbf.ft).
9. Rotate rocker adjusting screw anti-clockwise
one complete turn to give plunger the required
bump clearance and tighten rocker arm
adjusting screw locknut to 16 Nm (12 lbf.ft) .
3. > 4. Fit new gasket, fit camshaft cover to camshaft
carrier and tighten camshaft cover bolts to 9
Nm (7 lbf.ft).