V8_Disco · Oct 4, 2010

Autoglass quotes £300 odd
Local company quoted £200

ive got a big crack in the windscreen, needs replacing for the MOT but dont want to shell out as i will be selling the motor after xmas.

Is it easy to replace the screen, and does anyone have a second hand one i or somebody else could fit

Rich

barmatt · Oct 4, 2010

insurance??

V8_Disco · Oct 4, 2010

barmatt said:
insurance??

TPFT dont cover windscreens

barmatt · Oct 4, 2010

V8_Disco said:
TPFT dont cover windscreens

you learn summat new everyday.

V8_Disco · Oct 4, 2010

barmatt said:
you learn summat new everyday.

so did i when i rang up Adrian Flux

Mr Noisy · Oct 4, 2010

For reference, RRC screens are the same fit (afaik) so you could look there also.

davek0974 · Oct 4, 2010

V8_Disco said:
Autoglass quotes £300 odd
Local company quoted £200
Rich

Is that all

Got a dirty big chip in my 300 screen last week

autoglass said its got to be replaced - £490

, its bonded so must be done by them not me.

National WIndscreens fixed it for £50, laughed when i told them about autoglass.

Im on TPFT too but i'll be upgrading soon as i dont trust it not to crack and a bill that big hurts.

hughesy · Oct 4, 2010

200 series discos use the good old fashioned rubber seal so fitting a screen yourself is a piece of ****. Have a look on ebay you might find one local they don't fetch much second hand. It really is very easy to remove or fit one.

smarty1972 · Oct 4, 2010

As hughesy says it's easy to fit one with a rubber seal, Just need some nylon string to run inside the lip that sits around the bodywork and get somebodt to apply some presure to the windscreen as you pull it. Overlap the string by about a foot where the ends meet.

Mr Noisy · Oct 5, 2010

Should it be possible to fit a heated 300 screen to a 200?

Also smarty, would you mind expanding on how to remove a 200 screen? And to refit!

Just a basic walkthrough of the method would be very helpful!

Is there no sealant at all on a 200 screen, just the rubber seal?

Thanks in advance!!

moxon508 · Oct 5, 2010

i have a heated screen thats in a classic that is free should any body require one. theres also the relays etc for it.

smarty1972 · Oct 5, 2010

Mr Noisy said:
Should it be possible to fit a heated 300 screen to a 200?

Also smarty, would you mind expanding on how to remove a 200 screen? And to refit!

Just a basic walkthrough of the method would be very helpful!

Is there no sealant at all on a 200 screen, just the rubber seal?

Thanks in advance!!

All you need to do to remove it is sit inside and push the windscreen out with your feet again'st the screen(wear some boots though just in case it breaks) then place the string all around the lip of the rubber and get somebody to apply some pressure to the outside as you are pulling the string to pull the edge of the rubber in towards the inside(it's quite hard to explain). Just pull one side at a time and you will be ok. Just found a link to give you some idea of what i mean.
http://www.clubgti.com/forum/showthread.php?t=128246

Mr Noisy · Oct 5, 2010

moxon508 said:
i have a heated screen thats in a classic that is free should any body require one. theres also the relays etc for it.

Please say your local to me!!

This is gonna be a major help in the winter!

Mr Noisy · Oct 5, 2010

Many thanks for your help there smarty and for finding a link - uber helpful that one

My windscreen rubber is very cracked, will try to source another but could be hard to find now.

Any recommendations???

Thanks again folks

V8_Disco

New Member

barmatt

Well-Known Member

V8_Disco

New Member

barmatt

Well-Known Member

V8_Disco

New Member

Mr Noisy

Coming in your ears.

davek0974

Well-Known Member

hughesy

Well-Known Member

smarty1972

New Member

Mr Noisy

Coming in your ears.

moxon508

Member

smarty1972

New Member

Mr Noisy

Coming in your ears.

Mr Noisy

Coming in your ears.

Similar threads