Wayneboy77

New Member

• Sep 13, 2012

• #1

Afternoon all

I'm currently in the process of installing a defender 200 tdi engine into my 90. Problem I have is that the 200tdi exhaust that I have purchased does not match up to the existing brackets in the chassis. What exhaust should I have got or can I purchase brackets to fit? Any help is very much appreciated! Cheers all

 

666 george

Well-Known Member

• Sep 13, 2012

• #2

Get out the welder. I've got a ebay downpipe, 200tdi centre pipe & made a side exit back end

 

Wayneboy77

New Member

• Sep 13, 2012

• #3

Can I use a TD exhaust, would this match up to the hangers that are already there? Please bear in mind that my 90 was originally petrol. Cheers

 

666 george

Well-Known Member

• Sep 13, 2012

• #4

I used a TD to start off with but the 200 has a bigger bore. Don't know about the mounting points.

 

Wayneboy77

New Member

• Sep 13, 2012

• #5

Where did you get the brackets to weld on?

 

Wayneboy77

New Member

• Sep 13, 2012

• #6

Can anyone else shed some light

 

mark-d

Well-Known Member

• Sep 13, 2012

• #7

im doing the same, mine lines up more or less with the old brackets but they do differ so i am going to make some up off the old mounts

 

C

craigyb

New Member

• Sep 13, 2012

• #8

Wayneboy77 said:

Where did you get the brackets to weld on?

Click to expand...

Cut off old and weld on new

 

Wayneboy77

New Member

• Sep 15, 2012

• #9

All sorted, decided to get mounts fabricated which are being fitted today. Cannot wait to get the 200tdi finally fired up, I ain't gonna miss that petrol/lpg setup in the slightest