stevemilne750

Member

• Apr 9, 2008

• #1

Hey folks looking for some help have a clutch problem but not sure if its the clutch itself or a hydralic problem.Symtom are the clutch pedal has very little resistance until i push it all the way down were there is a little reistance.Gears will engage fine when engine i not running but when its running they crunch a little but do go in any help much appriciated hoping to repair it this weekend.

 

S

shanelloyd

New Member

• Apr 9, 2008

• #2

Not Sure If This Will Help But My Brothers Did The Same And Bleeding The Clutch Solved The Problem.

Shane

 

battenberg

Well-Known Member

• Apr 10, 2008

• #3

the clutch fork is a known problem. it wears through at the fulcrum and can cause the clutch to drag then eventually fail.

try bleeding it first though..!

 

leekegs

New Member

• Apr 11, 2008

• #4

Evening

sounds like you need to replace your clutch slave cylinder nice and simple job should take around an hour. if youdo replace it take your time so as not to drop the push rod into the bell housing.


Leekegs

 

stevemilne750

Member

• Apr 13, 2008

• #5

Thanks for help fixed after bleeding clutch.

 

iannotts

New Member

• Apr 13, 2008

• #6

leekegs said:

Evening

sounds like you need to replace your clutch slave cylinder nice and simple job should take around an hour. if youdo replace it take your time so as not to drop the push rod into the bell housing.


Leekegs

Click to expand...

Talk about jumping into a job