R

Ruthlessgk

Active Member
Hey Up Everyone,

Got a few things i need to find out -

1 - What is the white part of this called and can i get a replacement as passenger door is not opening. The Right Angle part of the cable keeps slipping out..


2 - I have the Book Symbol on my HEVAC unit. Anyone in the Sheffield area can do a diag for me?
Willing to share crunchy nut for the task :p

Cheerz in Advance

Zaff
 
Plastic retainer looks ok. Are you pushing it down into retaining hole properly. If it's loose, clip in then squeeze top up a little to close retainer.
 
Bend that cable end a little bit inwards and forget about it. Had this happening in all door handles. It's a result of trying to open locked door from inside by puling handle using too much force.
 
You won't find any one with diag to read the hevac except textbook??? Main dealer only so start looking at the how to guides to track down the problem
 
Odyssey has a GEMS-engined P38 and a Nanocom. Try him. Thoroughly nice bloke, though I reckon you'll have to come over to Chesterfield cos I think his is a bit poorly too at the moment.
 
Sadly, Nige is correct, RR is currently immobilised with HG probs, but I do have Nanocom and if you can make it over, you're welcome to plug it in if yours is Gems. Don't know if the hevac diag will work on other flavours. What's it not doing?
Alastair
 
Lol Thanks for the offer. I will have to have a drive down one day soon.
I will get the door fixed soon just been a bit busy recently. (Its already been nearly a year but as i always drive it doesnt bother me lol)
Mine is a 97 Diseasel. Will your Nanocom still work?
 
Ruthlessgk said:
Lol Thanks for the offer. I will have to have a drive down one day soon.
I will get the door fixed soon just been a bit busy recently. (Its already been nearly a year but as i always drive it doesnt bother me lol)
Mine is a 97 Diseasel. Will your Nanocom still work?
Click to expand...

A GEMS Nanocom will not work on the diesel.
 
Nanocom will still work as far as I know - it's only the engine ECU that the you won't be able to read and need the additional licence for, all the other modules are interchangeable, you could even
hook up to the Nanocom in the GEMS section - it doesn't check what engine ECU is installed unless you are trying to connect to the engine ECU.
 
martyuk said:
Nanocom will still work as far as I know - it's only the engine ECU that the you won't be able to read and need the additional licence for, all the other modules are interchangeable, you could even
hook up to the Nanocom in the GEMS section - it doesn't check what engine ECU is installed unless you are trying to connect to the engine ECU.
Click to expand...

OK never tried it so will have to take your word for it.
 
I'm sure I hooked up to GEMS and EDC models on mine when I just had the Thor ECU licence, before I unlocked it for all models. There are 4 P38 licences codes you can enter - one for each engine management system, and the fourth for all the other modules.
 
You must log in or register to reply here.

Similar threads

Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
4K
Goc3k
Goc3k
O
Strong crank but no start
Replies
14
Views
3K
Easysteam
E
R
My 1st post - little lost where to post - 2014 Freelander 2 door lock problem
Replies
4
Views
508
Rotaxengine
R
D
Disco 2 M+S Light flashing and D flashing on display P0743 solenoid valve lockup clutch monitor (s/c to grou
Replies
1
Views
2K
Stanleysteamer
Stanleysteamer
19_Hue_95
Cynthia - 300tdi Project
Replies
8
Views
2K
19_Hue_95
19_Hue_95