A

Andrew Goodman

New Member

• Jan 2, 2018

• #1

1. bought and fitted cruise control switches to my Disco td5. Don' work.
Seller says the ecu needs resetting?
2. Can I fit steering wheel audio controls if they were not originally fitted? The wiring is in the steering wheel.
Look forward to your reply.
Thanks.

 

Pawl

Well-Known Member

• Jan 2, 2018

• #2

I think the cruise control should be just install & use - certainly was on ours.
Don't know ref the audio

 

neilly

Well-Known Member

• Jan 2, 2018

• #3

Did you fit both switches for the cruise control?

http://www.discovery2.co.uk/cruise_install.html

Cheers

 

Iancorky

Well-Known Member

• Jan 2, 2018

• #4

Cruise control requires 2 switches, one on the steering wheel and one on the dash. Wiring should be in place

Heres a write up - http://www.discovery2.co.uk/cruise_install.html

Audio switches should work with the original stereo unit fitted to the vehicle, think you may need extra wiring with a different stereo

 

Iancorky

Well-Known Member

• Jan 2, 2018

• #5

neilly said:

Did you fit both switches for the cruise control?

http://www.discovery2.co.uk/cruise_install.html

Cheers

Click to expand...

Great minds

 

A

Andrew Goodman

New Member

• Jan 2, 2018

• #6

Yes, fitted dash switch and steering wheel switch. Dash switch lights, nothing works when using the steering wheel switch. My Disco is a s model so steering wheel audio remotes were not standard. Fitted Kenwood dab unit, but if fitting the audio remotes is possible, I'd like to do it.

 

neilly

Well-Known Member

• Jan 2, 2018

• #7

Are you going fast enough for the CC to work?

Cheers

 

A

Andrew Goodman

New Member

• Jan 2, 2018

• #8

neilly said:

Are you going fast enough for the CC to work?

Cheers

Click to expand...

Tried everything between 30mph and 70mph no go

 

sierrafery

Well-Known Member

• Jan 2, 2018

• #9

Andrew Goodman said:

.....
Seller says the ecu needs resetting?

Click to expand...

that's boll*x ... might be a fault somewhere which can affect the CC: brake switch, rotary coupler, clutch switch, etc

 

Feathers McGraw

Well-Known Member

• Jan 3, 2018

• #10

Were the switches new or used? If used is it possible for the contacts to have degraded enough to hinder operation?

 

A

Andrew Goodman

New Member

• Jan 11, 2018

• #11

All sorted guys, thanks. Wires to clutch switch had been linked, disconnected them and plugged the plug onto the switch, all working. Also found out can fit audio remotes to s model. They work with after market audio, with the correct adaptor. Well chuffed!!

 

meego

Well-Known Member

• Jan 11, 2018

• #12

Andrew Goodman said:

All sorted guys, thanks. Wires to clutch switch had been linked, disconnected them and plugged the plug onto the switch, all working. Also found out can fit audio remotes to s model. They work with after market audio, with the correct adaptor. Well chuffed!!

Click to expand...

Always good when a new member gives an outcome. Some get their solution and are never heard from again. Cheers @Andrew Goodman