2

2005lyndon

New Member
hi, im replacing the dizzy mounted ignition amp on the 35dlm8 distributor in my 3.5 rv8, the old amp is a 2 pin unit, whereas the new replacemnt is three pin, sadly the vendor cant tell me where the positve and negative wires from the coil go to on the amp, and i dont fancy frying it finding out, i believe one (possibly the middle one) is redundant in my apllication, i understand the early discos used this set up
 
use the link lead mate, cheap on paddocks and has a nice boot on it to waterproof the connections a bit
 
cheers bob, if all else fails i will purchase a link lead, but the replacemnt amp, comes with the connector and boot, and pins, just no explanation as to where they go, and like i say the vendor who is also strangely at matlock but not paddocks cant help me. i think craddocks do em as well, and they are a bit closer so may try them today, still got nealry a full tin of "start ya ba#@&trd" could allways set fire to the thing....:eek:
 
bob?

glad you figured it out lol I think you must be out somehwere along the lines of tdc-firing stroke and dizzy degrees and lead rotation but I dont have enough experience on the v8's yet to put you right.

Stuart could sort it for you no bother but hes v busy atm. PM me if you want his details.
 
googled it and came up with a fella on piston heads that had the wiring diagram, it is just two wires, middle is redundant
thanks for the thoughts anyway
 
The two pin amps are still available, if youre the sort of guy that likes to keep things original...
 
You must log in or register to reply here.

Similar threads

Nodge68
Freelander 2 (LR2) LR trouble codes.
Replies
6
Views
30K
Keith Kernow Kernewick
Keith Kernow Kernewick
rover86
V8 ignition wiring efi/electronic
Replies
3
Views
862
rover86
rover86
R
engine won't start (no spark
Replies
3
Views
2K
davidg
D
L
Distributor - vacuum advance/2 or 3 pin
Replies
2
Views
1K
landymangib
L
Dr_evil
Series King Cab
61 62 63
Replies
1K
Views
119K
discomark10
discomark10