I have been putting the heater box back and and failed to rember which cable gose where ano I
Bought all new springs and shocks from paddocks. They was ment to be with a 2 inc lift fitted the front 1st all went well. Fitted the back come to the last one on the back and noticed the my new 2inc springs what same hight as what was all ready on the back. They both measure 400mm from. Dose anyone no what size they are from standard and it looks to be lower at the back than front now or have I fit the front on the back n back on the front or would that not make a difference
Thanks In advance
They will be pictures come soon once I get back on my pc

Don't know sizes off the top of my head, but Paddocks definitely list the sizes of springs

Grimmer said:

Don't know sizes off the top of my head, but Paddocks definitely list the sizes of springs

Click to expand...

Ok cheers for that mate will try get on pc and have a look later on

I generally find Paddocks to be top end stuff, If your lucky they might take them back at minimal cost to you ie postage & repackaging

Jonnyb1990 said:

I generally find Paddocks to be top end stuff, If your lucky they might take them back at minimal cost to you ie postage & repackaging

Click to expand...

Yeh I have used them loads just want to try find out if I put front on back and so on or it already had a 2inc lift on back and not on front. Also I put the springs on the front they had coils wider apart and then last 2.3 coils was closer is that right way round or should they be on the back