C

Costlyy

New Member

• Jun 8, 2012

• #1

As the title says, would it fit straight on?


I have taken out the 2.5 petrol and it would be so much easier if that flywheel housing would bolt onto the disco 200tdi as i wouldn't need to feck about drilling new holes.

There is one obvious difference that i can see, the starter only has 2 bolts on the petrol.

 

jamesmartin

Well-Known Member

• Jun 8, 2012

• #2

will bolt on as block rear faces are the same but starter mount is different and would need either petrool flywheel or ring gear

 

wangie46

Active Member

• Jun 8, 2012

• #3

Sure I read somewhere that it does fit on but can't find the link, as you already heve the petrol out, whip the flywheel off and stick the flywheel and housing on the 200tdi and see, you will prob need to use the petrol starter motor aswell

 

C

Costlyy

New Member

• Jun 8, 2012

• #4

Fook it, i ain't taking off the petrol flywheel too.. Just getting the 200tdi flywheel off is a nightmare. I've now managed to completely bend my pretty heavy duty 1/2 drive Tee-bar and tent pole extender.

Haynes manual says you have to replace the flywheel bolts after removing them.. worth it?

 

Last edited: Jun 8, 2012