tomcat59alan
Well-Known Member
STC2182.is the feed pipe and STC 2184 is the drain pipe.
just realized you mean the pipe that connects the turbo to the drain pipe.
Last edited:
tomcat59alan
Well-Known Member
Have you tried lr cat.com?
tomcat59alan
Well-Known Member
It's showing as STC2179.
tomcat59alan
Well-Known Member
It was STC2179 now superceded by LR 005984 according to Rimmers.
tomcat59alan
Well-Known Member
No problems,Main Agent?
RangeRoller dt
Well-Sprung Member
Can only find genuine £40!
https://www.lrparts.net/stc2184-range-rover-p38-turbo-drain-pipe-2-5-bmw-diesel-engine.html
https://www.lrparts.net/stc2184-range-rover-p38-turbo-drain-pipe-2-5-bmw-diesel-engine.html
Last edited:
brianp38dse
Well-Known Member
Thats the intercooler hose thats goes from turbo to alloy pipe, sounds like he wants the one that goes from the block to the turbo oil return.
I cant even find it for a bmw
RangeRoller dt
Well-Sprung Member
I found the drain pipe ^^^edit.
I searched bmw too maybe it’s different, can only find genuine LR
I searched bmw too maybe it’s different, can only find genuine LR
stemac33
Well-Known Member
Yes I found the metal one but no one seems to stock the rubber bit on the end. Anyway the alloy pipe is 16mm on so I've ordered a 16mm id 90 degree rubber hose coupler for £8. Hopefully the works. Thanks for the help, will post outcome for anyone else who has the same problem.
tomcat59alan
Well-Known Member
That's right Brain,LR005984,as @stemac33 said just under£17 FFS.
stemac33
Well-Known Member
For anyone that needs one in the future I used one of these, cut down to correct length.
https://www.ebay.co.uk/itm/90-45-De...=p2349624.m2548.l6249&mkrid=710-127635-2958-0
As to how long it lasts that is as yet an unknown.
Make sure you drain the oil out before you take the old one off as its below the oil level, don't ask how I found out.
Hth
https://www.ebay.co.uk/itm/90-45-De...=p2349624.m2548.l6249&mkrid=710-127635-2958-0
As to how long it lasts that is as yet an unknown.
Make sure you drain the oil out before you take the old one off as its below the oil level, don't ask how I found out.
Hth
tomcat59alan
Well-Known Member
Hope it adequate for the oil,only says antifreeze,water and heat..
brianp38dse
Well-Known Member
I looked epdm up some time ago and it said it was not suitable for oil and hydrocarbons, as i was looking for a bit of rubber to do the tank to filler neck.
