Rover9676 · Oct 20, 2019

wammers said:
Electronic traction control. Yours may have rear TC but it should not have four wheel TC. When the ECU detects a spinning wheel from ABS sensor signal. It applies the brake to that wheel to send drive to the wheel with grip. Four wheel TC came in from 1999.

Wammers, installed the plug, turned on the ignition and ran for about 45 seconds and shut off.

Rover9676 · Oct 20, 2019

Rover9676 said:
Thanks Grrrrr! Going to run TEST at half-time.[/QUOTE
installed the plug, turned on the ignition and ran for about 45 seconds and shut off.

Rover9676 · Oct 20, 2019

Datatek said:
ANR2239[/QUOTE
installed the plug, turned on the ignition and ran for about 45 seconds and shut off.

Rover9676 · Oct 20, 2019

wammers said:
Electronic traction control. Yours may have rear TC but it should not have four wheel TC. When the ECU detects a spinning wheel from ABS sensor signal. It applies the brake to that wheel to send drive to the wheel with grip. Four wheel TC came in from 1999.[/QUOTE
installed the plug, turned on the ignition and ran for about 45 seconds and shut off.

Rover9676 · Oct 20, 2019

Grrrrrr said:
Wammers is the expert. Anything he says should be top priority.

Can someone tell what's best procedure for removing the abs-unit?

Rover9676 · Oct 20, 2019

Rover9676 said:
[/QUOTE
Can someone tell what's best procedure for removing the abs-unit?

Rover9676 · Oct 20, 2019

Grrrrrr said:
ANR2239.

Edit: just seen Datatek has already responded!

My memory is a bit hit and miss but I think 2239 is 2W TC.[/QUOTE
Can someone tell what's best procedure for removing the abs-unit?

Rover9676 · Oct 20, 2019

Rover9676 said:
Wammers, installed the plug, turned on the ignition and ran for about 45 seconds and shut off.

Can someone tell what's best procedure for removing the abs-unit?

Shimsteriom · Oct 20, 2019

You'll get the hang of this Internet thing soon, don't worry

Rover9676 · Oct 20, 2019

Shimsteriom said:
You'll get the hang of this Internet thing soon, don't worry

Is it that obvious. This is the first time I posted replies in a forum. I was just being courteous with a response to all.

Dopey · Oct 20, 2019

We need someone whos courteous on this forum.... it will make a change!!

brianp38dse · Oct 20, 2019

Rover9676 said:
Can someone tell what's best procedure for removing the abs-unit?

Have you downloaded a copy of Rave yet from in the Tech Archive, rave is the workshop manual on steroids it will tell you the procedure to change ABS unit.

wammers · Oct 20, 2019

Rover9676 said:
Wammers, installed the plug, turned on the ignition and ran for about 45 seconds and shut off.

Then the fault is in the ABS modulator. Well done.

Rover9676 · Oct 21, 2019

wammers said:
Then the fault is in the ABS modulator. Well done.

Thank you for taking the time to share and respond. I will try to source a unit tomorrow.

Rover9676 · Oct 21, 2019

brianp38dse said:
Have you downloaded a copy of Rave yet from in the Tech Archive, rave is the workshop manual on steroids it will tell you the procedure to change ABS unit.

I have a copy on CD rom.

tomcat59alan · Oct 21, 2019

Rover9676 said:
Thank you for taking the time to share and respond. I will try to source a unit tomorrow.

Well done, hope that sorts your problem, the price of brake fluid has hit an all time high due to the shortage in supply in Michigan.

Grrrrrr · Oct 21, 2019

tomcat59alan said:
Well done, hope that sorts your problem, the price of brake fluid has hit an all time high due to the shortage in supply in Michigan.

I think they drink it in the Mid-West. Tastes better than the beer.

Rover9676 · Oct 21, 2019

Grrrrrr said:
I think they drink it in the Mid-West. Tastes better than the beer.

Yeah after going through 3, 32 ozs it's running clear now.
Lol

wammers · Oct 21, 2019

Grrrrrr said:
I think they drink it in the Mid-West. Tastes better than the beer.

Nothing wrong with American beer. It's a lot better than some of the crap i have had in London.

Rover9676 · Oct 21, 2019

Grrrrrr said:
Don't know. I mentioned it because of the pedal going to the floor and apparently that was what happened. Only read about it though.

If you've tried 2 pumps already a replacement brake modulator seems the next obvious step. Pity you're not closer as I have one in my shed.

Grrrrrr, good morning! I'd like to purchase that modulator in your shed. I'll pay for shipping!

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Master Procrastinator

Active Member

Well-Known Member

Well-Known Member

No longer with us, RIP

Active Member

Active Member

Well-Known Member

Technician, Bodgit & Scarper Ltd

Active Member

No longer with us, RIP

Active Member

Similar threads