Hi
Its quite straght forward
I did mine in just over half an hour
The hardest bit is removing viscous fan without the special tool.
I put a screw driver flat blade near one edge of the nut holding the fan then tapped with a hammer then undo bolts scrape off old gasket fit new gasket and bolt it back up fill with coolant bleed coolant jobs a good in
Its quite straght forward
I did mine in just over half an hour
The hardest bit is removing viscous fan without the special tool.
I put a screw driver flat blade near one edge of the nut holding the fan then tapped with a hammer then undo bolts scrape off old gasket fit new gasket and bolt it back up fill with coolant bleed coolant jobs a good in
supermans_1
New Member
and 1 thing on these that are diff from most vehicles is that if u are looking at the fan from the front of the vehicle then u need to undo it anti closc wise just as if u was undoing a standard normal bolt most cars are reverse thread but these are not
took me just over a hour,thanks again
