ericthered

New Member

• Nov 3, 2010

• #1

I have been told that to change one of these bulbs ,its the back door panel off , there are 2 screws in the covers which are heavily rusted ,is it just a case of taking these out .
ETR

 

J

janderson41

Active Member

• Nov 3, 2010

• #2

According to Haynes all you do is loosen the two screws,lift out the light unit, then remove bulb and replace with new.Give the screws a good dose of wd40first. Replace with new or even self tappers.

cheers
jim Anderson
1996 300Tdi auto(Jap reimport)

 

SHORT ROUND

Active Member

• Nov 3, 2010

• #3

drill out the 2 screws mate normally 2 min job but with drilling and changing screws may take 10-15 mins

 

ericthered

New Member

• Nov 3, 2010

• #4

thanks for that lads didnt fancy going in through the back door .:doh: