kastle34

New Member

• Nov 7, 2009

• #1

Can someone point me in the right direction in where are the bolts to remove the calipers, what size?

I can see 2 at the back but they only look at around 13mm nuts which surely can not be.

 

Trewey

Cockernee, Pasty munchin bastid.

• Nov 7, 2009

• #2

kastle34 said:

Can someone point me in the right direction in where are the bolts to remove the calipers, what size?

I can see 2 at the back but they only look at around 13mm nuts which surely can not be.

Click to expand...

Yep, that's the ones. You'll need a 12 point socket though.

 

kastle34

New Member

• Nov 7, 2009

• #3

One looks shagged, I have 12 point sockets but I think I will struggle to get it off as it looks rounded, any suggestions?

 

Trewey

Cockernee, Pasty munchin bastid.

• Nov 7, 2009

• #4

Hammer a slightly smaller socket onto it. Then buy a new bolt before re-fitting.

I've got a set of these - very useful.

Irwin 5 Piece Bolt Grip Nut Remover Set - Screwfix.com, Where the Trade Buys

 

kastle34

New Member

• Nov 7, 2009

• #5

I mae have to, has anyone used one of them irwin nut removers?

I can see Im going to have problems replacing these discs?

 

Trewey

Cockernee, Pasty munchin bastid.

• Nov 7, 2009

• #6

Where bouts are ya? Somebody local might be able to elp.

Yes, I've used my Irwin bolt removers many times - they work well.

 

G

Gilbo09

New Member

• Nov 7, 2009

• #7

set of mole grips or maybe you can get a spanner on it?

 

kastle34

New Member

• Nov 7, 2009

• #8

Pontefract, west Yorkshire, I will ask some mates tonight if they have one?

 

kastle34

New Member

• Nov 7, 2009

• #9

impossible to get in with mole grips i think.

 

GRATCH

HUGE MEMBER

• Nov 8, 2009

• #10

1/2" socket slightly smaller than 13mm