A

APOSTOLOS

Active Member

• May 31, 2020

• #1

Hello ! I am planning to replace only the face of the rear cross-member on my 1984 One Ten. It is the part ANR2056. Could you please let me know which make (Genuine Land Rover , Bearmach etc.) produces their
rear cross-member with the recess for the trailer lights ? See the photo attached to see what i mean !
Thank you !

 

Attachments

• 
  land rover 110 rear crossmember.jpg

  318.1 KB · Views: 88

Tim4x4

Well-Known Member

• May 31, 2020

• #2

I think what you are looking for is the Td5 model rear crossmember. I don't know if they are interchangeable or not. DDS metal services Coventry has 19 variations of rear crossmember on their website. They may have just what you want. I have spoken to DDS previously and purchased their rear door and heavy duty crossmember. I am sure if they don't have on the shelf what you want they will make it for you. Their products are well made and top quality materials. Seriously worth a call.
Tim

 

Last edited: May 31, 2020

Gmacz

Well-Known Member

• May 31, 2020

• #3

Is this what you are after.
HD xmember at paddocks.

 

Tim4x4

Well-Known Member

• May 31, 2020

• #4

Gmacz said:

View attachment 210954
Is this what you are after.
HD xmember at paddocks.

Click to expand...

That one looks diffrent to the one in the photograph.
Tim

 

A

APOSTOLOS

Active Member

• May 31, 2020

• #5

Gmacz said:

View attachment 210954
Is this what you are after.
HD xmember at paddocks.

Click to expand...

I do not need the heavy duty one. Standard is fine ! I just need the cross-member to have the recess for the trailer lights plug. Do you know which make produces their cross-member with the recess ? The cross-member looks like the one in the picture at Gmaczs post as well as the one on my attached photo !

 

A

APOSTOLOS

Active Member

• May 31, 2020

• #6

Hello everybody ! I have great news regarding the rear crossmember. After thorough examination i have concluded that it can be fixed as is, as it does not have any rust at its structural points ! I have gone ahead and hit it with a hammer hard enough and it sounds and looks very solid ! Thank you for the info though ! Have a great Sunday !