catman275

Well-Known Member

Full Member

• Mar 20, 2019

• #1

Just a few piccies of my repairs, new bottom part plus a couple of pitted areas.
Replacement bottom was supplied by Welding Wood. I am quite pleased with the end results considering my welding skills are very basic.

 

LincolnSteve

Well-Known Member

• Mar 21, 2019

• #2

That's a lovely bit of work! Nice one.

 

R

rob1miles

Well-Known Member

• Mar 21, 2019

• #3

Does your have an angle welded to the inside, is that it in the photo sideways on? Mine did and it acted as a water trap. I had to drill the spot welds and get it off before I could repair then replace with new angle.

 

S

suburban

Well-Known Member

• Mar 21, 2019

• #4

impressive

 

steve2286w

Well-Known Member

• Mar 21, 2019

• #5

Very neat , paint it well

 

catman275

Well-Known Member

Full Member

• Mar 21, 2019

• #6

rob1miles said:

Does your have an angle welded to the inside, is that it in the photo sideways on? Mine did and it acted as a water trap. I had to drill the spot welds and get it off before I could repair then replace with new angle.

Click to expand...

Only the frame plates on the back which were spotwelded on. Nothing in the way of a water trap.

 

catman275

Well-Known Member

Full Member

• Mar 21, 2019

• #7

steve2286w said:

Very neat , paint it well

Click to expand...

I am part way through doing the bulkhead and am getting them both galvanised along with other smaller parts.

 

C

Colthebrummie

Well-Known Member

• Mar 22, 2019

• #8

That's a great bit of welding, you'd be welcome at my place anytime, bring your mask.

Col