S

Stuart1298

New Member

• Sep 21, 2014

• #1

Hi guys, been looking for a smaller steering wheel for my discovery 200tdi it's a 36 spline but not having much luck, so looking at a steering boss, I no I need a 36 spline one, but it's saying something about 16mm, 17mm, 18.5mm column, can anyone shed some light in this? I no he retaining nut was a 19mm

 

S

Stuart1298

New Member

• Sep 21, 2014

• #2

Anyone? I just need to no what bit is measured is it the spine diameter?

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Sep 21, 2014

• #3

Stuart1298 said:

Anyone? I just need to no what bit is measured is it the spine diameter?

Click to expand...

Maybe ask whoever's saying what sizes they have? They should be able to tell you where they get the measurement from.

 

S

Stuart1298

New Member

• Sep 21, 2014

• #4

I've sent a few messages but no answer, just been out to the motor, got a 17mm spanner over the splines with the ring end, but wouldn't fit over with the flat end, would probably gone over with a bit of force so hope that answers my question