the_wolf

Well-Known Member

• Jan 13, 2015

• #1

Could anyone possibly provide me with some photos of how rock sliders mount/fit on a standard 110 chassis? I say standard as mine is far from it, it has an HD chassis built by LR for Scottish Power and its got quite a few differences from the standard one. Just wanna see what I'm having to work with before I go and buy some rock sliders that potentially don't fit.

 

n4th4n

New Member

• Jan 13, 2015

• #2

I took mine off at the weekend.

There is basically a bracket around the mid length of the slider with 3 x 10mm bolts and then 2 more 10mm bolts at the front end.

The bracket at the front attaches via a rather long 10mm bolt (about 120mm long). If you want to remove the bracket then you'll have to take the long 120mm all the way out, if you want to leave the bracket on the car and simply remove the RS them just undo the 10mm bolts attaching the RS to the bracket. The pics below 'may' help show you where the brackets are and what the 120mm long bolt looks like.

As the 120mm bolt holds the chasis I just stuck a bottle jack underneath and took some weight whilst I whipped out the long bolt.

 

Last edited: Jan 13, 2015

the_wolf

Well-Known Member

• Jan 13, 2015

• #3

I knew about the one at the front that uses the outrigger bolt as my old 90 had the same for its rock sliders. Do you have better pics of the other brackets?

 

n4th4n

New Member

• Jan 13, 2015

• #4

Not on my phone. but can put the brackets back on the sliders I'm cleaning up and post them up tonight.

When I stick them back on I might just cut a 10mm slot into the front bracket so I don't have to remove the 120mm bolt all the way out form the outrigger again.

 

the_wolf

Well-Known Member

• Jan 13, 2015

• #5

That'd be brilliant mate, many thanks.

 

n4th4n

New Member

• Jan 14, 2015

• #6

Hopefully this will help

 

the_wolf

Well-Known Member

• Jan 14, 2015

• #7

Ah so is it outrigger bolts that it uses to attach along the full length?

 

n4th4n

New Member

• Jan 14, 2015

• #8

Yep all the 10mm ones

 

the_wolf

Well-Known Member

• Jan 14, 2015

• #9

Brilliant, ill have a look and see what I've got to work with. Many thanks