chrisstdt

Well-Known Member

• Feb 21, 2019

• #1

300 tdi 110 hi cap brake lights have stopped working ( no power getting to the units at the rear)

There is power getting to the switch at the pedal box and ive tested the switch on another landy and it works fine

Ive traced the wiring back as much as possible but cant see anything obviously wrong

Is there a multi plug somewhere in the loom that could of come loose or gotten corroded ?

Thanks

 

mojo247

Active Member

• Feb 21, 2019

• #2

have you checked the fuses or bulbs? just to eliminate them!

 

chrisstdt

Well-Known Member

• Feb 21, 2019

• #3

Sorry should of said the fuse is fine and the reverse light which is on the same fuse works
New bulbs too so i suspect a wiring fault between the pedal box and the rear clusters

 

H

Hicap phill

Well-Known Member

• Feb 21, 2019

• #4

Have you got power from pedal?
Have you then got power to the multiplug into the loom?

This will then go straight to the rear
No other plugs in chassis.

If you want to prove the lights use the purple(permanent ) live to see if lights/holder ok

 

tottot

Well-Known Member

• Feb 21, 2019

• #5

Multiplug is near the driver footwell before loom goes into chassis.

 

chrisstdt

Well-Known Member

• Feb 21, 2019

• #6

Hicap phill said:

Have you got power from pedal?
Have you then got power to the multiplug into the loom?

This will then go straight to the rear
No other plugs in chassis.

If you want to prove the lights use the purple(permanent ) live to see if lights/holder ok

Click to expand...

Yes i have power at the plug above the pedal box

I bridged the two wires and still no power to rear

 

chrisstdt

Well-Known Member

• Feb 21, 2019

• #7

tottot said:

Multiplug is near the driver footwell before loom goes into chassis.

Click to expand...

Thanks for that the plug must be hidden behind something but i shall dig it out and see if thats where the problem lies