chrisstdt

Well-Known Member
300 tdi 110 hi cap brake lights have stopped working ( no power getting to the units at the rear)

There is power getting to the switch at the pedal box and ive tested the switch on another landy and it works fine

Ive traced the wiring back as much as possible but cant see anything obviously wrong

Is there a multi plug somewhere in the loom that could of come loose or gotten corroded ?

Thanks
 
Sorry should of said the fuse is fine and the reverse light which is on the same fuse works
New bulbs too so i suspect a wiring fault between the pedal box and the rear clusters
 
Have you got power from pedal?
Have you then got power to the multiplug into the loom?

This will then go straight to the rear
No other plugs in chassis.

If you want to prove the lights use the purple(permanent ) live to see if lights/holder ok
 
Have you got power from pedal?
Have you then got power to the multiplug into the loom?

This will then go straight to the rear
No other plugs in chassis.

If you want to prove the lights use the purple(permanent ) live to see if lights/holder ok
Yes i have power at the plug above the pedal box

I bridged the two wires and still no power to rear
 

Similar threads