IamRobbie

Well-Known Member

• Sep 19, 2016

• #1

I'm considering selling my 10spline are air locker and changing my front axle to 24spline like the rears. Just testing the water to see if anyone would be interested in buying it in the diff with solenoid and pipe for £350.

Seals were done not too long ago and I haven't used it since before I changed my engine. Flicked it on today and it still holds air. Diff seems good as well.

 

IamRobbie

Well-Known Member

• Sep 19, 2016

• #2

Arb ***

Damn auto correct

 

Rossdisco1

New Member

• Sep 22, 2016

• #3

Hello just wondering would it fit my 93 disco 1 tdi

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Sep 22, 2016

• #4

Rossdisco1 said:

Hello just wondering would it fit my 93 disco 1 tdi

Click to expand...

Yes, providing you use 10 spline half shafts.

 

Rossdisco1

New Member

• Sep 23, 2016

• #5

I'd need to pull a shaft out for a look just baught this truck so havnt had a much of a look round her

Paul D said:

Yes, providing you use 10 spline half shafts.

Click to expand...

 

IamRobbie

Well-Known Member

• Sep 23, 2016

• #6

To fit in the rear toy would need rear shafts like Paul said however I do have a set of those if you want them with ot then possibly swap yours with mine as Im. Going to stick a 24spline in the rear of mine at some point

 

IamRobbie

Well-Known Member

• Sep 23, 2016

• #7

Actually thinking about it them rear shafts may be for drum brakes