[theshanclan]

I am changing the brake discs on our Disco and the philips screw that holds on the disc is knackered.

Any advice on how to get this out now?

 

[Trewey]

Drill the fooker.

 

[Soloby Rob]

Drill the head off, job done.

 

[theshanclan]

f me. Two answers the same! Got to be the way and I am ready to get medieval with it.

 

[theshanclan]

Thanks

 

[landowner]

View attachment 8508

Thanks

Warm em up and impact driver brings em out or get em hot and unscrew with a small chizel and big hammer.

or a drill

 

[theshanclan]

Warm em up and impact driver brings em out or get em hot and unscrew with a small chizel and big hammer.

or a drill

will try this on the next three...

 

[heggars]

You can never go wrong if you use a BFH. OK so you might have to replace a few more parts..... but it's fun as hell

 

[theshanclan]

You can never go wrong if you use a BFH. OK so you might have to replace a few more parts..... but it's fun as hell

BFH - Also known as a universal adaptor:biggrin1:

 

[stretchie_]

I would have gone with the impact driver... I bought mine when this happened doing the disks on my Civic.

I love it, only used it once but it's one of my fave tools, much more satisfying than the drill

 

[MartinK]

Theschanclan

The part # for the screw is SF108201L

Use an impact driver with a #4 pozi bit and you'll pop it out in no time.

 

[aviator]

It dunt really need a screw in there anyway, the disk int gonna move wiv the wheel bolted on.