[goonarmy]

reinflate ns/front tyre.defo got a slow in that.

 

[TheVengefulElephant]

how slow? you can get repair patches for big tires can't you? Sure I've seen that.

 

[goonarmy]

ill get it done proper for a tenner!

 

[TheVengefulElephant]

or that!

 

[madfrank]

took the rock slider off beat the crap out of it ,, when it was straight instead of banana shape put it back on......

 

[Robke]

put in a CB , some hood pins , new steering damper and in a couple of days going to do all the bushings, wheel barings and U joints

 

[SCOTSMAN]

Got it al muddy picking a load of firewood.

MARK

 

[landowner]

Took the gearbox mount off... ...anyone local up for straightening it cheap?

 

[Disco Moneypit]

All welding in the front inner wings now complete. Holes in the roof patched up. Radiator and intercooler both flushed out, soaked, then blasted all the crap out of the fins & Viens with an airline ready to put back on tomorrow.

Still need to fit the rad & intercooler. Drill my drain holes in the interior. Paint and waxoil. Re-fit windscreen rubber. Clean up floor, sanding all loose paint off, before painting with Karust, then Hammorite primer, then a rubberised safety paint top coat. Then I can re-fit my interior and get my ECU put inside a waterproof container to stop it getting wet.

 

[madfrank]

thought discos came with drain holes in the boot .......

 

[letsgoagain1]

Put my spare wheel in finally.....its on a shiney new spare wheel carrier attached to the bulkhead, and it looks goooood, although the smell of brand new rubber has really given me a headache when driving....think I'll take a pic tomorrow.

And replaced brake light bulbs...(well all of the fixture).

....ok I had help and didn't do all of it.

 

[TheVengefulElephant]

Put my spare wheel in finally.....its on a shiney new spare wheel carrier attached to the bulkhead, and it looks goooood, although the smell of brand new rubber has really given me a headache when driving....think I'll take a pic tomorrow.

And replaced brake light bulbs...(well all of the fixture).

....ok I had help and didn't do all of it.

tut tut! that's not the landyzone way you have to attempt it yourself, mess it up, swear a lot, bodge it for now, then get someone else in to help

 

[madfrank]

Tis a split arse

 

[Grippa]

tut tut! that's not the landyzone way you have to attempt it yourself, mess it up, swear a lot, bodge it for now, then get someone else in to help

An' that's the approach you use fixing your 'Landy' is it?

 

[Grippa]

although the smell of brand new rubber has really given me the horn

Durdy beaatch.

 

[TheVengefulElephant]

Havent got one to fix But when me landy broke, I swore a lot, ordered a new bit, sliced me knuckles, swore some more, then driv it

 

[letsgoagain1]

Durdy beaatch.

not tthat kinda rubber I'll have you know!!

 

[letsgoagain1]

tut tut! that's not the landyzone way you have to attempt it yourself, mess it up, swear a lot, bodge it for now, then get someone else in to help

I did try myself, but its more fun to learn practically rather than mess it up completely when you don't know how to make a correct electrical seal and may set your landrover on fire......... that would be a whole lot more expensive.

 

[TheVengefulElephant]

I did try myself, but its more fun to learn practically rather than mess it up completely when you don't know how to make a correct electrical seal and may set your landrover on fire......... that would be a whole lot more expensive.

hmm.. maybe fair shout

 

[letsgoagain1]

hmm.. maybe fair shout

yeeeah!!