Officerdibble

Active Member
Hi ppl,
Is there such a part ( I’ve looked for a part on here on the parts numbers sticky) can’t find anything anyone got any ideas or do I need to fabricate sumit
Cheers
 

Attachments

  • IMG_0755.jpeg
    IMG_0755.jpeg
    196.5 KB · Views: 27
Hi ppl,
Is there such a part ( I’ve looked for a part on here on the parts numbers sticky) can’t find anything anyone got any ideas or do I need to fabricate sumit
Cheers
Drill the pop rivets and it comes out no bother. Or it should as mine did. I have some old road signs lying about and as their aluminum I made the new part out of that.
 
Changed that with the Yrm one. It was easy enough. Good quality part too. Meegos idea also works. Did the same with a bit of sheet Ali the size of the recess and with an angle at the end to rivet onto tub as well. Yrm one is actually easier to do with the tub off but that turns into a bawbuster. ✌🏻
 
Drill the pop rivets and it comes out no bother. Or it should as mine did. I have some old road signs lying about and as their aluminum I made the new part out of that.
Mine looks like it’s been spot welded so might be a bit trickier to remove
 
Do you not drill out the spot welds and rivet the new one in place using the same holes?
Or cut it off from the back and bond it in place, would look neater.
The spot weld are a lot bigger than rivot holes so I haven’t figured out which it’s the best way to do it , probably wait until the part I’ve ordered arrives & contemplate a plan
 

Similar threads