Shabe

Member
Hello, recently I’ve changed oil and oilfilter, but I am having some doubts about the spare oilfilter I put on.

1735045950002.jpeg

This is the one I used and changed it with the one below

1735045983630.jpeg

They were both same height, but if anyone who knows could tell me which one or if both works fine.

Thanks
 
Hello, recently I’ve changed oil and oilfilter, but I am having some doubts about the spare oilfilter I put on.

View attachment 332211
This is the one I used and changed it with the one below

View attachment 332212
They were both same height, but if anyone who knows could tell me which one or if both works fine.

Thanks
Both will work fine, just make sure you put the O-ring in the cover cap in the right place.
qf7YQyTl.jpg
1

clean the oil chamber out properly.
R5Cl4r8l.jpg
2

QPxFll6l.jpg
3

Fit the filter into the chamber not into the cap.
iZOgo5al.jpg
4

Once in nip it down to 15Nm its on the cap anyways
4kdTYg9l.jpg
5
 
Is there a reason to put the filter in the chamber rather than the cap?
I've only put mine in the cap first and never considered putting it in the chamber first.
 
Is there a reason to put the filter in the chamber rather than the cap?
I've only put mine in the cap first and never considered putting it in the chamber first.
Yes it makes sure it is seated correctly in the oil pot/chamber, also some come with seals in the filter this needs to be also seated correctly in the base of the pot.
 

Similar threads