[Rodeo Joe]

Got the 2.5 N/A sorted now and need a filter, really just a cone on the end will do and not a super expensive performance one either!
Can't seem to find one anybody got any pointers?
Cheers
RJ

 

[wireman]

You should be able to measure the Outside Diameter (OD) of the manifold then buy a cone filter with the correct Internal Diameter (ID).

Something like this:
https://www.ebay.co.uk/itm/Universa...229143?hash=item3b00303297:g:K7AAAOSwP4FZ~V8e

 

[Turboman]

View attachment 207887
Got the 2.5 N/A sorted now and need a filter, really just a cone on the end will do and not a super expensive performance one either!
Can't seem to find one anybody got any pointers?
Cheers
RJ

What's wrong with standard oil bath?

 

[tottot]

If just using on road cone will be ok but if getting dirty fit the standard filter, was designed for the job and works well.

 

[Rodeo Joe]

What's wrong with standard oil bath?

Had to modify the battery tray cos of the pump position so theres no room for it now.

 

[Rodeo Joe]

You should be able to measure the Outside Diameter (OD) of the manifold then buy a cone filter with the correct Internal Diameter (ID).

Something like this:
https://www.ebay.co.uk/itm/Universa...229143?hash=item3b00303297:g:K7AAAOSwP4FZ~V8e

Thanks thats just what I was looking for, wasn't putting the right thing in the search before.

 

[Rodeo Joe]

If just using on road cone will be ok but if getting dirty fit the standard filter, was designed for the job and works well.

Thanks yes I don't go offroad.......had enough of that malarky when I did soil sampling for a living.

 

[Bobsticle]

Just nail a tea strainer over it so it dunt suck any birds in.