mordzy
Active Member
Hi all.
Just come to wire up my alternator with a lucas type 3pin plug. Have connected the two larger connectors back to the +12v on the starter. On cranking the ignition fuse blows (30 amp.)
I have disconnected and run the engine and checked the output with a meter and it's 18.4v is this correct?
Any ideas why it's blowing fuses?
Engine is 3.5v8
Thanks
Just come to wire up my alternator with a lucas type 3pin plug. Have connected the two larger connectors back to the +12v on the starter. On cranking the ignition fuse blows (30 amp.)
I have disconnected and run the engine and checked the output with a meter and it's 18.4v is this correct?
Any ideas why it's blowing fuses?
Engine is 3.5v8
Thanks