Dr_evil
Banned
up your arseound:
Not a fan of the idea of a pokey bum ****
but from the sounds of your suggestion you are
Not a fan of the idea of a pokey bum ****
but from the sounds of your suggestion you are
Grimmer
THE Winner
Pikey
Dummy Ejection Facilitator..
Use a stick
Why?? do try to be specific. I have a stick welder. 100amp powerdevil ****ty thing that hasn't been used for about 4years have 1/6mm 2.5mm and 3.5mm (IIRC) also been stood around for 4 years. Do ya think I'll get better results with the sticks than I would with me 190amp mig????
Dr_evil
Banned
Why?? do try to be specific. I have a stick welder. 100amp powerdevinl ****ty thimg that hasn't been used for about 4years have 1/6mm 2.5mm and 3.5mm (IIRC) also been stiid around for 4 years. Do ya think I'll get better results with the sticks than I would with me 190amp mig????
Maybe ? but I was thinking if you've run out of mig wire then you may as well use that if you've got some decent sticks left over!
The welds I did earlier today on the 3mm box I was using 1/8th rods on 110A which is a 3.2mm rod, they turned out pretty nice IMO
Pikey
Dummy Ejection Facilitator..
:boink: don't really see how that's going to help
Am saving the sticks for when I'm ready to light a fire in it..
Grimmer
THE Winner
Made this a while ago for my mate, he was goin camping in Scotland and you are not allowed open fires.
Made it from a Helium bottle and some 3 inch exhaust pipe, very light so as it could be thrown on the roof rack and really pumped the heat out.
Doors not as good as yours though
Made it from a Helium bottle and some 3 inch exhaust pipe, very light so as it could be thrown on the roof rack and really pumped the heat out.
Doors not as good as yours though
Only thing I didn't do was fit a flap to regulate it, my mate used to put a piece of slate on top of the chimney to stop it drawing so much and burning the wood away. He used to dry his socks etc on it as well
